Quality custom cabinets for your new kitchen

IMPORTANT - Haddon Kitchens & Cabinets can provide a wide range of custom cabinets for our custom kitchen renovations . As we specialise in complete kitchen renovations, we do not supply ‘cabinets only’ for existing kitchens or DIY kitchens.

Which are the best cabinet and door material for your kitchen? The choices are many and varied, here we have listed some advantages of the different products.

If you would like more information on a specific product or some advice on which product is best for your needs contact us at Haddon Kitchens and our friendly experienced staff will be happy to answer any of your kitchen cabinet questions.

Haddon Kitchens and Cabinets can cater for all your Kitchen Renovations Brisbane .

Melamine

Available in a wide variety of colours and textures, melamine is a very easy to maintain, practical choice for cabinet doors. The edges of the doors are covered by a 1mm PVC edging material that can match the colour of the melamine. This preferred type of edging gives the door a very impact resistant finish, as well as being slightly rounded over and eliminating those sharp edges of the past.

Acrylic

Proving to be very popular due to their high gloss level, acrylic doors are UV & colour fade protected, have a high scratch resistance, won't chip, crack or delaminate and are very easy to clean and maintain. Available in a range of colours with a 1mm edge to match.

Timber Veneer

Sheets of natural timber veneer are bonded onto both sides of a substrate board. The finished sheet of board is then cut into various door sizes and a 0.4mm or 2mm matching veneer stripping is bonded onto the edges. Being raw timber, it then needs to be clear lacquered for protection and to bring out the natural beauty of the grain. A ‘two-pack’ clear lacquer is the recommended coating for this type of door.

Two Pack

Very popular in recent times is the two pack kitchen (sometimes written ‘2 pac’) It is a specialised two-part painted finish to the face and edges of doors and panels. A hardener is mixed with the paint which produces a very hard wearing surface. This style is available in almost any colour, and the gloss level can vary from high gloss to satin finish or matt finish.

Timber

Timber kitchens always vary in popularity as trends change but still remain timeless as a choice for the natural look. There are many different species of timber and a large range of door and panel styles to select from. Usually, a single pack clear lacquer is applied to the finished timber doors, or the more expensive two pack clear lacquer can be used if a harder surface is required. Timber vanity units should always be coated with two pack clear lacquer because of the wet area environment.

Farmers Doors

The Farmers range of doors, panels and feature mouldings are manufactured using a combination of natural timber veneers, plantation hoop pine, MDF board and quality adhesives. The frame and panel construction throughout virtually guarantees an indestructible product. There are numerous colours, finishes and styles available to give the completed kitchen or cabinet a truly unique look.

Visit the Farmers website via Our Suppliers to find out more about this great product.